ASME B31.1 places practice requirements on Operators for the maintenance of their Covered Piping Systems (CPSs).
Condition Assessments are required on a regular basis, associated with good record-keeping for traceability. Over time this generates large volumes of documentation and inspection history data, therefore a coherent solution to knowledge management is needed.
PipeVue 2.0 was developed by Tetra Engineering to store and organize large amounts of inspection data in one network-based solution, easily accessible for both plant operators as well as engineers planning yearly inspections.
PipeVue 2.0 has three modules covering:
Pipe Hangers & Supports
Flow-accelerated Corrosion inspection data
Grade 91 Weld inspection data
The software stores hanger/support setting information (hot/cold), inspection notes, photos, NDT data and associated design documentation (PDF drawings & manuals) in a simple and categorized manner, with 3D-visualization of all components. The user can add new data and save to a networked database, where it will be instantly accessible for other users. The software is available as a deliverable from Piping Inspections, or independently as a Knowledge Management System for Power Piping. Engineering support from Tetra is available as an option, creating an instant channel between plant personnel and third party engineers.
Book a free consultation
Our goal is to protect the value of your investments and improve the performance of your assets.
PipeVue 2.0 was developed by Tetra Engineering to store and organize large amounts of inspection data in one network-based solution, easily accessible for both plant operators as well as engineers planning yearly inspections.
Tetra Engineering Group, Inc. has assisted many owners of natural gas-fired combined cycle plants with the development of effective Covered Piping Systems (CPS) Programs, Inspection Plans, Pipe Stress Analysis and Field NDT since the ASME adopted the new Code requirements for piping O&M in Section B31.1 Chapter VII in 2007.
Since 2007, the ASME B31.1 Power Piping Code has included mandatory requirements on the Operation and Maintenance (O&M) of Covered Piping Systems (CPS), previously called High-Energy Piping. The main concern is that the safety of these systems is very dependent on good O&M, which justifies its inclusion in the Construction Code. There is room for flexibility depending on individual circumstances but the responsibility is squarely laid on the Operating Company.