News

Thermal Shock / Impingement Assessment

Contact Us
Table of Contents

Many combined cycle power plants have experienced thermal shock damage to bypass power piping, especially in the HP steam and Hot Reheat systems. Severe shocks occur when inadequate drainage exists and liquid water accumulates in bypass piping, for example during periods of operation when the bypass is closed or during shutdowns. Startups where the bypass is opened then allows the accumulated liquid to be picked up and carried at high velocity downstream where it impacts on the internal surface at a change in piping direction, imparting a significant load and associated stress.Low load operation is another means by which very high attemperator spray can fail to be absorbed by the steam and consequently come in contact (in liquid form) with the pipe wall.

Figure 1: Thermal Shock Crack in Hot Reheat Bypass Piping Downstream of Spray Valve

Good control logic and operator awareness is crucial to ensure that spray water doesn't build up when valves are closed, that sprays are not exceeding their proper flow range or that there is over-spraying into the steam.  Since these thermal impingement/shock induced cracks initiate on the steam-side (ID), a volumetric crack detection using ultrasonic testing (UT linear phased array or shear wave) inspection is the best NDT inspection technique. Magnetic Particle (MT) inspection can be used as a supplement or independent method although it is not as likely to identify small i.d. initiating flaws.

Figure 2: Thermal Shock Induced Mid-Wall Cracking – Inter-Stage Attemperator Piping

If you want more information about this subject contact us.

Book a free consultation

Our goal is to protect the value of your investments and improve the performance of your assets.

Contact Us

More News

Stay up to date and refer to our large collection of technical white papers and articles

Using Thermohydraulic Simulations to Assess HRSG Performance
News

Using Thermohydraulic Simulations to Assess HRSG Performance

Thermohydraulic simulations can provide detailed heat recovery steam generator (HRSG) data to help determine the root cause of failures, predict the degree of wear from various mechanisms, and assess the overall thermal efficiency of the boilers. In this article, the results obtained from three case studies are presented to show the real-world benefits obtained through thermodynamic simulations.

Learn more
Thermal Plant Simulation
News

Thermal Plant Simulation

How a High Fidelity Thermal Plant Simulation Package Can Help Your Engineering Group Keep Your Plants at Peak Productivity?

Learn more
Benefits of extended thermocouple installations on HRSG tubes
News

Benefits of extended thermocouple installations on HRSG tubes

If your plant suffers from frequent failures, installing additional thermocouples can prove to be invaluable when assessing the actual root cause of the failures.

Learn more

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre usine ou à maintenir sa valeur au fil du temps

Nous contacter