Performance & Efficiency Assessments

Services to help you evaluate how your operating performance has changed since the plant / boiler was commissioning, or to help you check the potential performance impact of planned modifications before they are implemented.

Contact Us
Performance & Efficiency Assessments

Today’s combined cycle power plants can achieve near 60% efficiency when new and operating at the design load-case, but operating off-design can severely reduce efficiency and hence the heat-rate. The challenge is two fold:

  1. How can you identify where the lost Watts are going?
  2. When found, what is the best way to gain them back?

Typically, performance losses are associated with age-related degradation (for example fouling),off-design operation, or modifications that lead to changes in process conditions (for example, a GT upgrade that affects downstream HRSG performance).

Tetra Engineering has the experience and tools for identifying the origin of performance losses and how they might be recovered in considering the feasibility and cost-effectiveness.

Performance & Efficiency Assessments
Performance & Efficiency Assessments
Performance & Efficiency Assessments

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre usine ou à maintenir sa valeur au fil du temps

Nous contacter

Related Engineering & Analysis Services

Life Assessments

Life Assessments

Knowing the remaining useful operating life of your boiler, HRSG and associated balance-of-plant is a key parameter for effective management of your thermal power plant.

learn more
Performance & Efficiency Assessments

Performance & Efficiency Assessments

Services to help you evaluate how your operating performance has changed since the plant / boiler was commissioning, or to help you check the potential performance impact of planned modifications before they are implemented.

learn more
Root Cause of Failure (RCA)

Root Cause of Failure (RCA)

Knowing the fundamental causes leading to failure is essential to mitigate the risk of the failure repeating. Tetra Engineering calls on an interdisciplinary team to assess the failure (or degradation) and determine the root cause.

learn more
Optimized NDE

Optimized NDE

Risk-based inspection (RBI) is an approach for ranking the priority of inspection and maintenance according to an assessed risk to the component or system integrity. One key aspect of any RBI program is to carefully select the locations for non-destructive examination (NDE) that are most susceptible to damage, according to the component's design and past and project operating mode, while considering the resources and time available during an upcoming inspection. Using multi-disciplinary experience and tools (thermal simulation, life assessment, structural calculations….) Tetra will help you get the most out of your NDE campaigns, by providing pre-outage planning, on-site supervision and post-inspection review.

learn more
Flow Accelerated Corrosion Assessment (FAC)

Flow Accelerated Corrosion Assessment (FAC)

Identify and prevent tube and pipe thinning caused by flow-accelerated corrosion (FAC) to avoid ruptures and leaks.

learn more
Boiler Process Modelling and Simulation

Boiler Process Modelling and Simulation

Tetra Engineering provides a full-scope service for the modelling and operation analysis of all types of natural or forced circulation Power Boiler and HRSGs, including supercritical and once-through designs. This can be integrated into a full plant model to incorporate the steam turbine and steam cycle balance of plant.

learn more
Fitness for Service

Fitness for Service

A fitness for service (FFS) evaluation is a process for assessing the structural integrity and safety of components that may have experienced damage and deterioration during their service life.

learn more

Recent Resources

Stay up to date and refer to our large collection of technical white papers and articles

Creep Classification of Grade 91 Steel
Whitepaper

Creep Classification of Grade 91 Steel

Background Grade 91 steel is superior to many other industry used materials for its increased resistance to m...

Learn more
Duct Burners
Whitepaper

Duct Burners

Excess air in the gas turbine exhaust allows the combustion of additional fuel via supplemental firing in the ...

Learn more
Flow Accelerated Corrosion (FAC)
Whitepaper

Flow Accelerated Corrosion (FAC)

Background Tube thinning caused by flow-accelerated corrosion (FAC) is one of the most frequent causes of fai...

Learn more
Silent Threat: Sulfuric Acid Corrosion in Combustion and Exhaust Systems
News

Silent Threat: Sulfuric Acid Corrosion in Combustion and Exhaust Systems

Sulfuric acid deposits in combustion and exhaust systems can silently damage equipment, reduce efficiency, and lead to costly downtime. Tetra Engineering’s advanced fouling assessment services identify the root causes of deposit formation and provide tailored solutions to keep your operations running smoothly. Protect your equipment, enhance efficiency, and ensure uninterrupted power generation with Tetra Engineering. Learn more today!

Learn more

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre usine ou à maintenir sa valeur au fil du temps

Nous contacter