Ressources

Consultez nos ressources gratuites.

Contactez-nous
Industrial facility with large overhead metal pipes supported by red metal framework under a clear blue sky.

Guides techniques

Tetra a publié une série de guides, disponibles à la commande.

Cover of the HRSG Inspection Planning Guide (2nd Edition)

HRSG Inspection Planning Guide (2nd Edition)

L'inspection fait partie de la maintenance courante de toute chaudière de récupération (HRSG). Des inspections visuelles sont réalisées à intervalles réguliers, conformément aux exigences des organismes de réglementation et des assureurs.

Cover of the HRSG Tube Failure Diagnostic Guide (3rd Edition)

HRSG Tube Failure Diagnostic Guide (3rd Edition)

Les tubes des chaudières de récupération (HRSG) permettent d'extraire l'énergie utile de la chaleur des gaz d'échappement des turbines à gaz dans les centrales à cycle combiné, ou de la chaleur produite par les flux de procédé dans les installations pétrochimiques.

Livres blancs techniques

Une sélection de documents techniques à consulter.

Merci ! Votre demande a bien été reçue.
Oups ! Une erreur s'est produite lors de l'envoi du formulaire.

Diagnostic des défaillances de tubes de HRSG

Le diagnostic des causes de défaillance des tubes de HRSG n'est pas toujours simple. Parfois, une cause assez évidente facilite la tâche.

En savoir plus

Acier Grade 91

Contexte : les défaillances précoces de composants en aciers ferritiques à résistance au fluage améliorée (CSEF) dans les chaudières et les HRSG ont suscité une large attention dans le secteur.

En savoir plus

Corrosion accélérée par l'écoulement (FAC)

Contexte : l'amincissement des tubes par corrosion accélérée par l'écoulement (FAC) est l'une des causes de défaillance les plus fréquentes des tubes de HRSG.

En savoir plus

Raisons d'inspecter

L'inspection fait partie de la maintenance courante de toute chaudière de récupération (HRSG). Des inspections visuelles sont réalisées à intervalles réguliers.

En savoir plus

Supports et suspensions de tuyauteries

Les supports et suspensions de tuyauteries doivent être inspectés régulièrement. Des interférences avec des équipements ou des structures peuvent les endommager gravement.

En savoir plus

Corrosion au point de rosée de l'acide sulfurique

Le facteur déterminant de la vitesse de formation des dépôts en partie froide des HRSG fonctionnant au gaz naturel est le point de rosée de l'acide sulfurique.

En savoir plus
Tetra Engineering logo. Orange triangular pyramid on a black background.Tetra Engineering logo. Orange triangular pyramid on a black background.

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre centrale ou à préserver sa valeur dans le temps

Nous contacter

Publications, présentations et articles

Une sélection de publications, présentations et articles issus des grandes conférences et événements du secteur.

Titre
Auteur
HRSG Preservation During Shutdowns: A Key Issue Often Neglected
HRSG Preservation During Shutdowns: A Key Issue Often NeglectedHRSG Preservation During Shutdowns: A Key Issue Often Neglected
Misha Gadher & James Malloy
Modern Power Systems, 2026
What do HRSG tube failure statistics tell us?
What do HRSG tube failure statistics tell us?What do HRSG tube failure statistics tell us?
Misha Gadher & Mark Taylor
Modern Power Systems
Counterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGs
Counterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGsCounterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGs
Taylor M.
IMechE HRSG User Group 2022
Adapting Existing Thermal Desalination Plants to Produce Hydrogen
Adapting Existing Thermal Desalination Plants to Produce HydrogenAdapting Existing Thermal Desalination Plants to Produce Hydrogen
Malloy J.
2022 World Utilities Congress
Root Cause Failure Investigation of MSCV Drain Failures
Root Cause Failure Investigation of MSCV Drain FailuresRoot Cause Failure Investigation of MSCV Drain Failures
P. Jackson, A. Wholey, E. Tsai and D. Burns
ASME 2022 Pressure Vessels & Piping Conference

Projets réalisés

Forte de plus de 35 ans d'expérience dans les services liés à la production d'électricité et de vapeur industrielle, Tetra Engineering a mené de très nombreux projets.

Middle East

CFD Analysis of Cooling Water Outfall - Foam & Pulsation Mitigation, 2025

Tetra Engineering and long term partner R&R Consult, investigated severe foam formation and pressure pulsations at the cooling water outfall of a 1,000 MW combined-cycle gas turbine (CCGT) plant. The issue stemmed from cooling water falling freely from a drop shaft, entraining large volumes of air and causing unstable operation. Using advanced transient two-phase CFD modelling (Volume of Fluid), the hydraulic behaviour was simulated and multiple design modifications were tested. The analysis revealed that air entrainment was the root cause of the foam and pulsations. Tetra Engineering implemented a simple yet effective solution: installing baffle blocks immediately downstream of the drop shaft. This reduced air entrainment by 47%, stabilising plant operation with minimal investment. The result: safer, more reliable cooling water discharge and improved operational performance.

Europe

CFD Analysis of Flue Gas Bypass – Root Cause Analysis, 2024

Tetra Engineering partnered with R&R Consult to investigate reduced steam production at a large natural gas-fired power plant. Despite normal operating conditions, the boiler was underperforming. An inspection revealed that hot flue gas was bypassing the boiler tubes, reducing heat transfer efficiency. CFD analysis by R&R Consult showed that 6.3% of the flue gas was flowing along the sides of the boiler and between modules, missing the heat exchange surfaces entirely. This bypass flow was the root cause of the performance loss. Tetra Engineering designed and installed covering plates to redirect the gas through the intended path. The result was improved boiler performance and increased electricity output.

Middle East

CFD Analysis of Condenser Choking – Root Cause Analysis, 2023

Tetra Engineering partnered with R&R Consult to perform a root cause analysis of a condenser tube system experiencing flow choking. The CFD simulation revealed an uneven flow distribution across the tube sheet, with significantly reduced throughput in peripheral tubes. This pattern was linked to variations in the degree of cleaning across different sections of the condenser. The results demonstrated how CFD provides insight into internal flow behavior that is otherwise difficult to assess, making it a powerful tool for diagnosing and resolving persistent operational issues.

Middle East.

CFD Analysis of GRP Piping Caustic Dosing, 2018

Caustic soda is injected into the product water in order to raise the pH as required by the specification. Inspection of GRP piping has often shown large amounts of deposition inside these pipes. Deposition is mostly observed downstream of the injection point of sodium hydroxide and can therefore be attributed to unsuitable chemical injection. Typical injection setups utilise four simple (no nozzle) injection ports at 90° from one another causing ineffective mixing of the flows, leading to the observed precipitation. Tetra performed a CFD analysis of the caustic injection process to investigate the degree of mixing of the two flows and simulate the effects of modifying the volumetric flow rate.

Tetra Engineering logo. Orange triangular pyramid on a black background.Tetra Engineering logo. Orange triangular pyramid on a black background.

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre centrale ou à préserver sa valeur dans le temps

Nous contacter