This training course is primarily intended for experienced O&M staff working in thermal power and process plants, but could also be of interest to corporate engineering and management staff. The objective is to give attendees a comprehensive view of the strategy, actions and considerations involved in effectively managing and thereby assuring the integrity of piping, tubing and vessels that form the pressure boundary to steam or water process fluid. A range of topics relating to the design, inspection and repair of relevant components are treated using a combination of theory and numerous practical examples. The examples are all based on actual project cases encountered by Tetra Engineering staff at plants around the world.
Overview of Pressure Part Design and Components
Understand the key considerations involved in designing all the power and process plant components that form the pressure boundary.
- Review of Design Codes and Standards for Tubes, Piping and Vessels
- Design Criteria and Design Choices
- Shop Fabrication and Field Installation Basics
Review of Damage Mechanisms
Gain insight into the theory underlying the most damage mechanisms that affect pressure boundary components, either on the waterside or fire/air-side.
- General Surface Corrosion and Pitting
- Flow Accelerated Corrosion and Fluid Erosion
- Underdeposit Attack
- Fatigue and Corrosion Fatigue
- Creep and Creep Fatigue
- Fire or Gas Side Erosion or Attack
- Other Mechanisms (Hydrogren Embrittlement, Stress-Corrosion Cracking etc.)
Inspection and Surveillance
A survey of the inspection and surveillance techniques and practices that are available and how to best choose the best approach for assuring pressure part integrity over time while considering the impact of economic and operational constraints.
- Setting the Strategy
- Overview of Practical NDE Techniques
- Field Inspection Practice
- Covered Piping Systems
- Boiler Tubes, Headers and Internal Interconnect Piping
- Pressure Vessels and Tanks
- How to Review Operating Data
- Inspection Data Knowledge Management
Learn about various methods to predict wear and damage in pressure parts
- Component Life Assessment Techniques
- Overview of “Fitness-for-Service” Assessments
- Combining Analysis and Inspection to Improve Condition Assessments
Root Cause Analysis (RCA)
Methods or approaches for determining the root cause are presented in summary fashion. Whatever the method chosen, it is important to remember that the ultimate objective is to find a solution that prevents further failures.
- Collecting Evidence and Identifying Failure Mechnaism
- A Summary of Root Cause Analysis Methods
Welding & Repair of Pressure Parts
Learn about how to best plan and then perform repairs to meet the challenge of achieving schedule, cost and quality objectives.
- Assessing Repair Options and Planning Repairs
- Review of Available Welding & Repair Codes and Guidelines (ASME XI, PCC-2 etc.)
- Assessing and Assuring Welding Quality
- Special Materials (P91)
- Tracking Repair History
Sample Case Histories and Discussion
Examples from recent projects performed by Tetra staff are presented, covering field inspections, life assessments and failure analyses on a variety of steam cycle pressure part components.
This course is offered in a 2 day format and a condensed 1 day format.