June, 2018 - Introduction to Welding for O&M Staff

June 14 & 15, 2018 in Sophia Antipolis, France

Overview

This training course is primarily intended for O&M staff working in thermal power and process plants, but could also be of interest to corporate engineering and management staff.  The objective is to give attendees an introduction to the world of welding and a basic understanding of the key elements involved in assuring weld quality during fabrication, installation and repair works.A range of topics relating to the design, processes, inspection and repair of welded joints on relevant components are treated using a combination of theory and numerous practical examples.  The examples are all based on actual project cases encountered by Tetra Engineering staff at plants around the world.

Course Syllabus

Introduction to Welding

  • Welding Basics
  • Welding Processes (TIG, GTAW, FCAW, MAG)
  • Welding Procedure Specification (WPS)
  • Procedure Qualification Record (PQR)
  • Welder Qualification Test (WQT)
  • Preheat and Post Weld Heat Treatment (PWHT)
  • Joint types and design
  • Preparation and fit-up

Welding Indications and Detection Methods

Learn about the most common flaws detected in various types of welding joints and which inspection methods are applicable. 

  • Cracks, Lack of Fusion, Inclusions, Excessive Weld Penetration (EP), Porosity, Undercut
  • Visual Inspection Techniques, Remote Visual Inspection (RVI), Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT), Radiographic Testing (RT), Phased Array Ultrasonic Testing (PAUT)
  • Standards and Codes

Quality Assurance and Control

  • Basics of Quality Control
  • Applicable codes and procedures
  • Inspection & Test Plans (ITPs)
  • Audits / Assessing and Assuring Welding Quality
  • Common issues / case studies of poor Quality Control

Repair Welding - Good Practices

  • Assessing Repair Options
  • Planning Repairs
  • Resource requirements
  • Special Materials (P91)

Registration

The price for the course is €1,195 per person and includes all course materials, as well as a lunch each day of the course. To register or for more information, please contact Ms Christine Vallon, This email address is being protected from spambots. You need JavaScript enabled to view it., at our European office, or call at +33 4 92 96 92 54.

About Us

Established in 1989, Tetra Engineering has more than 25 years experience providing solutions to the power industry. We specialize in solutions for HRSGs, conventional boilers & steam-cycle balance of plant.

Links

Our Locations

Offices in: Connecticut, USA; Nice, France; Dubai, UAE.