Grade 91 Piping Risk Assessment

Higher demands on outlet steam conditions has led to increased use of modified low alloy materials (9-12% Cr), such as Grade 91. The superior high temperature material properties of these types of steels (strength, fatigue resistance, creep resistance, improved steam oxidation resistance) gives the designer advantages with respect to boiler reliability and thermal performance. The advantages of using this type of materials are many; however, the long-term integrity has been a concern to the industry ever since the first installations.

A number of failures have occurred in recent years, some catastrophic; type IV creep cracking in the Heat Affected Zone (HAZ) has been the dominant failure mechanism.  Advantageous mechanical properties can only be assured if heat treatment is properly performed through the entire fabrication and construction cycle.   Improper welding or heat treatment will result in a product not fit for its purpose, increasing the risk of premature failures.  Tetra performs risk assessments encompassing all key aspects that can contribute to component failure:

  • Design
  • Manufacture and Assembly
  • Installation
  • Operation

Finite Element methods are used to analyse large piping and boiler components in order to accurately determine the geometrical effects on the nominal stresses present.  The results are used in a creep analysis to determine damage up to date and the remaining life of the components.  If the plant is planning to change the operating process conditions, a boiler simulation study can be used to predict the local temperature and pressure conditions in tubes and piping in advance.  Key components to be checked are identified and integrated into an Inspection Plan, for use by plant staff and NDT personnel.

For more information contact Peter Jackson at This email address is being protected from spambots. You need JavaScript enabled to view it. (North/South America) or Andreas Fabricius at This email address is being protected from spambots. You need JavaScript enabled to view it. (Europe, Middle East, Asia).

About Us

Established in 1989, Tetra Engineering has more than 25 years experience providing solutions to the power industry. We specialize in solutions for HRSGs, conventional boilers & steam-cycle balance of plant.

Links

Our Locations

Offices in: Connecticut, USA; Nice, France; Dubai, UAE.