Using Thermohydraulic Simulations to Assess HRSG Performance

on .

Thermohydraulic simulations can provide detailed heat recovery steam generator (HRSG) data to help determine the root cause of failures, predict the degree of wear from various mechanisms, and assess the overall thermal efficiency of the boilers. In this article, the results obtained from three case studies are presented to show the real-world benefits obtained through thermodynamic simulations.

Power plant staff needs reliable information on process conditions in heat recovery steam generators (HRSGs) to ensure safe operation and optimum performance. Current and historical operating data from the distributed control system (DCS) is a useful starting point, yet it does not provide detailed information on temperatures, pressures, or flows in all areas of the HRSG. This is achieved by running thermohydraulic simulations of the process. More detailed data can help in determining the root cause of failures or in predicting the degree of wear from a variety of mechanisms, including flow accelerated corrosion (FAC), fatigue, corrosion fatigue, and creep. Another advantage of simulation is that it can serve as a “test bed” to assess the impact of design or operating regime modifications on efficiency or unit life....

PPSD

Typical triple pressure HRSG Gas scheme

The full article written by Tetra Engineer Jean-Mark Monnac from the European office can be found in the February issue of Power Magazine, as well as online. You can access it here

For more information about Thermohydraulic simulatiions contact Mr James Malloy (EMEA) This email address is being protected from spambots. You need JavaScript enabled to view it. or Mr David Moelling (North/Central/South America) This email address is being protected from spambots. You need JavaScript enabled to view it..

 

About Us

Established in 1988, Tetra Engineering has more than 25 years experience providing solutions to the power industry. We specialize in solutions for HRSGs, conventional boilers & steam-cycle balance of plant.

Links

Our Locations

Offices in: Connecticut, USA; Nice, France; Dubai, UAE.